Setting Alarms; Setting The Alarm - Acoustic Research ART1 Manual Del Usuario

SETTING ALARMS

Setting the Alarm

1. Turn the Select controller to the "SET 1" or "SET 2" position, as indicated below:
2. Use the rotary encoder, followed by the OK button, to select one of the following alarm
parameters to adjust:
SELECT SOURCE
• Time: Set the alarm time.
• Schedule: You can choose to have the alarm sound once, every day, weekdays (M-F)
only or weekend days only. If you select once, you can then select the day you want the
alarm to sound on.
• Source: Select the sound the alarm will make. Choose from AM, FM, iPod, NATURE or
BUZZER. In AM and FM mode, you can select stored presets using the rotary encoder,
or you can use the TUNE+/TUNE- buttons to select a station
• Volume: Select the appropriate alarm volume.
3. When finished, return the Select control to music mode, as indicated below:
NOTE: Use the alarm 1 and alarm 2 buttons on either side of the MENU button to turn the
alarms on/off.
ADJUST TIME
SELECT SCHEDULE
ADJUST VOLUME
9