FUTURO AUTOFOCUS Manual De Instrucciones página 37

3.3.4 Autofocus control panel on the right side of the video window
3.3.5 Focus area in the video window
The focus area is used to select the area to be examined for the autofocus process. Clicking the button
AF in the camera control toolbar
ing anywhere in the video window resets the focus area for the
panel is closed, the focus area
Note: If the autofocus function is active, the
ter is moved to the upper video area.
When the
Autofocus
the autofocus according to the status of the object until it is in focus;
When the
Manual focus sensor should be reset by scrolling up or down with the mouse until the
object is in focus;
A one-time autofocus process can be performed by clicking the
One push AF
Push button;
The camera sensor can be reset to the
clicking the
function allows the sensor position to be calibrated while both the ca-
mera video window and the image seen in the eyepiece are in focus. The
use of the
camera is used for the first time. This will ensure that the camera sensor
is in the
Conjugated Corre- eyepiece image level and camera adapter image level are in the default
ction position;
Note: 1) If the height of the object changes, it is important to ensure
that the sensor is in the
correctly via the coarse and fine adjustment knob of the microscope; 2)
The Conjugated Correction
ment to guarantee the accuracy of the measurement results (for more
information, see Measurement
Figure 17 Focus area
opens the focus area
automatically closes.
measurement toolbar
autofocus button is activated, the system automatically starts
manual focus function is activated, the position of the camera
C-mount
Conjugated Correction button. The
Conjugated Correction function is recommended when the
C-mount default position. This guarantees that the object level,
C-mount default position and the focus is set
should be performed prior to the measure-
toolbar>Conjugated
together with the autofocus control
autofocus
will not open when the mouse poin-
One
default position by
Conjugated Correction
Correction...).
panel. Click-
process. When the autofocus
19