Sanyo CE42LM4N-NA Manual De Instrucciones página 2

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but
improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe
the following basic rules for its installation, use and servicing.
Installation
WARNING: To prevent injury the LCD monitor must be
securely fixed in accordance with the manufacturers
mounting installation instructions.
This monitor must NOT be permanently mounted to the build-
ing structure. It must be mounted in such a way that it can be
removed using basic tools.
The power supply cord must NOT be attached to the building
surface. The power supply cord must NOT be routed through
walls, ceiling, floors, or other similar openings in the building
structure.
The power supply cord MUST be positioned so as to prevent
physical damage.
Do not allow anything to rest on the power cord. Do not
locate this LCD monitor where the cord will be damaged by
people walking on it.
A suitable socket outlet must be provided near to the monitor
and shall be easily accessible.
Do not overload wall outlets as this can result in fire or elec-
tric shock.
Do not place this LCD monitor near any heat sources such as
radiators, heaters, stoves and other heat-generating products
(including amplifiers).
This LCD monitor should not be built in to any structure or
enclosed in any way. Heat build up will reduce the life of the
monitor.
Always mount using recommended and substantial fixtures
and fittings.
Do not place this LCD monitor in direct sunlight.
Do not place your LCD monitor on an unstable stand, shelf or
table. Serious injury to an individual, and damage to the LCD
monitor may result if it should fall. Your sales person can rec-
ommend approved wall mounting kit. A special wall mounting
kit is available for this model.
This LCD monitor should be operated only from the type of
power source indicated on the monitor or as indicated in the
Operating Instructions. If you are not sure of the type of power
supply, consult your sales person or your local power compa-
ny
For added protection it is strongly recommended that this
monitor is supplied via an approved earth fault protection device
Never add accessories that have not been specifically
designed for this monitor.
Do not place items such as vases containing liquid on top of
the monitor. Some internal parts carry hazardous voltages and
contact may result in an electric shock hazard. Never spill liq-
uids of any kind on this LCD monitor.
Do not expose the LCD monitor to rain or use near water.
For example, near a bathtub, kitchen sink, in a wet basement,
etc.
Do not use immediately after moving the LCD monitor from a
low temperature to a high temperature environment, as this
causes condensation, which may result in fire, electric shock,
or other hazards. Before cleaning, unplug the television
receiver from the wall socket.
Do not apply liquid cleaners or aerosol cleaners directly onto
the LCD monitor. Use a damp cloth for cleaning.
Do not mount near an open flame source. Open flames must
never be used near this LCD monitor.
The rear finned section around the cabinet functions as a heat
sink, removing heat away from the monitor. The external sur-
face of the cabinet (finned area) must not be covered or the
2
SAFETY
SAFETY
Use
PRECAUTIONS
PRECAUTIONS
airflow resricted in any way by enclosing the LCD monitor
This LCD monitor should have a minimum distance of 5cm
away from the wall and the monitor should have 10cm dis-
tance around the top and sides
10cm
Your LCD monitor is fully transistorised and does not contain
any user serviceable components.
You must not remove the rear cover of the TV by yourself. The
apparatus is working with high voltages and could damage
objects or even endanger people. Leave all required repair and
service jobs to an authorised service technician. He will exclu-
sively use such spare parts that are complying with the same
safety standards as applicable to the original parts. The use of
original spare parts can prevent fire, shock and other hazards.
Unplug the LCD monitor receiver from the wall outlet and refer
servicing to qualified service personnel under the following con-
ditions:
■ If the power cord or plug is damaged.
■ If liquid has been spilt in to the LCD monitor.
■ If LCD monitor has been exposed to rain or water.
■ If the LCD monitor has been dropped or the cabinet has been
damaged.
■ If the LCD monitor exhibits a distinct change in performance.
LCD
■ If the LCD monitor does not operate normally by following the
operating instructions.
Adjust only those controls that are covered in the operating instructions
as improper adjustment of other controls may result in damage. This
will often require extensive work by a qualified technician to restore the
LCD monitor receiver to normal operation.
10cm
10cm
Servicing
5cm