Final Recommendations - Telcoma Automations RB2 Serie Instrucciones De Uso Y De Programación

GB
WHAT THE LED BLINKS MEAN
KIND OF FLASHING
LD2 alights for 3
1 quick flash of one led
2 quick flash of one led
3 quick flash of one led
flash of leds together
alternating flash of leds
leds alight for few
seconds
AERIAL
In the package you can fine a cable that can be use as additional antenna, if
connected to the central unit's clamp
To improve the reception and the range of the remote controls, we suggest to install
an antenna in 433 MHz (for example DAMA430).
The antenna should be placed high and eventually above metal elements (railings,
nets, ...).
Connection between antenna and receiver should be made with a cable in
impedance of 50 ohm (for example RG58). Possibly don't use longer than 10 meters
cable.

FINAL RECOMMENDATIONS

1. Always state the model (FM400, NOIRE, EDGE or TANGOSW series) clearly
when ordering additional memory chips for the receivers.
2. In case of decreased transmitter range, replace battery with one having identical
specifications.
3. TELCOMA S.r.l. reserves the right to make any modifications to its products, at any
time, as it deems proper in order to enhance its aesthetic and/or functional
characteristics.
32
DESCRIPTION
Just powered receiver
Reception of 1 memorized code in impulsive
Reception of 1 memorized code in P/P
Reception of 1 memorized code in timer
during programmation, it means that the code you are
trying to memorize is already present in the memory
during programming, it means that memory is full
it means that the remote control has a different family
from the already memorized remote controls