Led Indicator - Happy Plugs EARBUD PLUS WIRELESS II Manual Del Usuario

USER MANUAL / ENGLISH
CONNECT AND USE
1. Activate Bluetooth on your phone/device.
2. Press and hold the center button on the Wireless II
Remote to turn on and pair.
3. Select Wireless II on your device's bluetooth list.
CHARGING
1. Connect the included Micro-USB cable to the side
port of the Wireless II remote.
2. Plug the other end to a USB wall charger or laptop.
3. The LED on the front of the remote will light RED when
charging. When fully charged, it will switch to GREEN.

LED INDICATOR

STATUS LED
Charging Red
Charging full Green
Low battery Red
Pairing mode Red & Green
Power on Green
Power off Red
Reset Red
FREQUENCY