Regarding Lithium-Ion Battery Transportation - Metabo HPT R 18DSAL Manual De Instrucciones

English
WARNING
If a conductive foreign matter enters in the
terminal of lithium ion battery, the battery may
be shorted, causing fi re. When storing the
lithium ion battery, obey surely the rules of
following contents.
○ Do not place conductive debris, nail and
wires such as iron wire and copper wire in
the storage case.
○ Either install the battery in the power tool
or store by securely pressing into the
battery cover until the ventilation holes are
concealed to prevent short-circuits (See
Fig. 1).
Ventilation holes
Latch
Battery
Fig. 1
8
Terminals
Battery cover
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please
observe the following precautions.
WARNING
Notify the transporting company that a package
contains a lithium-ion battery, inform the
company of its power output and follow the
instructions of the transportation company
when arranging transport.
● Lithium-ion batteries that exceed a power
output of 100Wh are considered to be in
the freight classifi cation of Dangerous
Goods and will require special application
procedures.
● For transportation abroad, you must
comply with international law and the rules
and regulations of the destination country.
Power Output
2 to 3 digit number
PRECAUTIONS FOR CORDLESS
CLEANER
1. Always charge the battery at a temperature
of 0°C – 40°C. A temperature of less than
0°C will result in over charging which is
dangerous. The battery cannot be charged
at a temperature higher than 40°C.
The most suitable temperature for
charging is that of 20°C – 25°C.
2. When one charging is completed, leave the
charger for about 15 minutes before the
next charging of battery.
Do not charge more than two batteries
consecutively.
Wh
Fig. 2