Symbols Used; Overview Operational Controls; Overview Display Version Main Screen; Ventilation Modes - Brink Air Control Manual De Usuario

II Symbols used
Warning! The user can (seriously) injure himself or
seriously damage the product.
A warning is indicative of a risk of damage to the user
or product, if the user does not execute the procedures
carefully.
Careful! The product can be endangered. "Careful" is
indicative of a risk of damage to the product, if the user
does not execute the procedures carefully.
Take note! A remark with supplementary information
for the user. A remark draws the user's attention to
possible problems.
Product description
Name:
Model/Type:
Electricity
Power consumption:
Protection class:
Power reserve:
Ambient conditions
Ambient temperature:
Storage temperature:
Humidity:
Other:
The Brink Air Control should be placed and used in a space
with the correct ambient conditions for proper operation. The
Brink Air Control may only be mounted on the indoors, but
not on the vicinity of a heat source, a radiator, in a draft or in
a humid environment. The Brink Air Control may also not be
exposed to direct radiation heat (sun light).
The Brink Air Control may also not be mounted in the vicinity
1.3 Overview operational control
The Brink Air Control has a number of buttons with which the
device can be operated:
1 Setting knob
2 Return key
Setting & activating timer programme
3
Manual control key
4
Bypassing the timer programme
5
Brink Air Control
Brink Climate Systems
15 to 24 Volt
1,5 Watt
IP30
> 48 hours
0 °C to 50 °C
-20 °C to 60 °C
10% to 90%
Exclusively for indoor use
1

1.4 Overview display version main screen

Flow rate indicator
1
eBus connection indicator
2
Fan indicator
3
4 Fault symbol
Filter message
5
Current time block
6
Current time
7
Current date (day / month / year)
8

1.5 Ventilation modes

The Brink Air Control has four ventilation modes. You can ac-
tivate a ventilation mode yourself (for more information see
chapter 4). You can adjust every ventilation mode yourself (for
more information see paragraph 4.7).
You can retrieve the set values at the Device information menu
(see and § 4.8).
11
2 Precautionary measures and safety
instructions

2.1 General

Warning! The installation and assembly activities
required to commission your Brink Air Control should
be performed by an installer approved by Brink Climate
Systems.
Warning! Immediately remove the power from your
Brink Air Control by removing the connected device's
plug from the socket, if:
Parts of the Brink Air Control lie open, are pierced or
had fallen hard;
The power cable is damaged;
The screen is cracked or broken.
Then contact Brink Climate Systems or you supplier.
Take note! Never use parts other than original parts.
Take note! Only use the Brink Air Control indoors, at
temperatures between 0 °C and 50 °C and with a rela-
tive humidity between 10% and 90%.
Take note!
will be lost if the Brink Air Control breaks down or if
the factory settings are reset. There is no backup
available.

2.2 During placement

Take note! Assembly and installation should be per-
formed by an installer approved by Brink Climate
Systems. The following requirements should be taken
into account during placement:
8
2
3