OK. ORC 310-B Manual De Instrucciones página 19

PROGRAM PLAYBACK
Notes:
• Up to 20 CD tracks or up to 99 MP3 tracks can be programmed for a playback in any desired order.
• Programmed playback can only be made from one single source - it cannot include tracks from CD
disc and USB storage at the same time.
Stop playback: Press STOP.
1.
18
Enter program settings: Press PROG. PROG and P01 will show on the display.
2.
3. Select desired track: Press
Only for MP3:
Select desired folder: Press ALBUM.
4. Store selected track into the program memory: Press
display.
5. Repeat step
6. After programming all the desired tracks, press
7. Stop playback: Press 1x STOP.
8. Cancel program
AUXILIARY (AUX) PLAYBACK
Set the function switch to the AUX/CD/USB position.
19
Connect auxiliary device to the AUX-IN socket using 3.5 mm jack audio cable (not included).
20
If an auxiliary device is connected, all playback functions of this device need to be used.
BASS BOOST SYSTEM FUNCTION
Switching the bass boost system on/off: Set BBS button to ON or OFF position.
21
COMPATIBLE CDs
• Only use CD compact discs with digital audio signals.
• The making of unauthorized copies of copyright-protected material, including computer programs,
files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a
criminal offence under your national law. This equipment should not be used for such purposes.
CLEANING AND CARE
• WARNING! Before cleaning, always switch off the appliance and disconnect the plug from power.
• Never immerse the appliance in water or other liquids.
• Clean the appliance with a soft, slightly damp cloth. Make sure that no moisture is entering the
appliance during cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp implements to clean
your appliance.
• Dry the appliance thoroughly after cleaning.
• Store the appliance in a cool, dry location, away from children and pets.
ORC310-B_A5_140410 (1.1).indb 19
SKIP+ SKIP-
or
3 and 4 to program additional tracks.
playback: Press 1x STOP.
19
.
PROG again. P02 will now show on the
to start program
PROG disappears from the display.
EN
playback.
11/04/2014 5:42 PM