How To Use - Wagan Tech Brite-Nite 2 Million LED Spotlight Lantern Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Brite-Nite
2 Million LED Spotlight Lantern
Do not charge the unit for more then 30 hours at a time.
Do not turn on while charging. Doing so may cause battery damage.
Do not use in water or wet conditions. Store in a clean, dry environment.
Keep out of reach of children.
Never stare directly into the light: doing so can cause eye damage.
Strong impacts may cause damage to the unit: please handle with care.

HOW TO USE

1. Use the Mode selector at the back of the light to choose "HIGH", "LOW" or
"LED" mode.
2. If "LED" is selected, the LED lantern on the side will turn on.
3. If "HIGH" is selected, pull the Spotlight Power trigger to turn on the halogen
light. Use the trigger lock to keep the spotlight running continuously.
4. If "LOW" is selected, pull the Spotlight Power trigger to turn on the halogen
light. Use the trigger lock to keep the spotlight running continuously.
5. The unit will not turn off automatically: When the light output is low, turn off
the spotlight and charge immediately to maintain the battery. Draining the
battery too low will shorten battery life.
6. To prevent overheating, do not use the spotlight on the "HIGH" setting for
more than 40 minutes consecutively. Allow to cool before reuse.
3
www.wagan.com
by Wagan Tech
®

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2484

Tabla de contenido