Myride VI-MYPTT-01 Instrucciones De Operación página 7

2.2 STARTUP
1: REMOVE THE MYRIDE VX FROM THE PACKAGING
®
Myride® VX is fully pre-assembled and doesn´t require any assembly prior to mounting it to an
appropriate Indoor Cycle.
2: MOUNTING TO THE INDOOR CYCLE
Slide Myride® VX onto the handlebar. It is recommended to run the lower power cable inside
the shroud and firmly fix it to the frame to prevent from any rip hazards.
Please make sure that you follow the installation guide correctly or allow this operation to be
undertaken by trained and qualified service technicians.
3: POWER ON MYRIDE VX
®
Connect the power cables by using the correct AC plug required for the electrical system in
your country.
4: POWER ON MYRIDE VX MEDIA SERVER (FOR VI-MYGTS-01 ONLY)
®
Plug the power supply into a socket and connect it to the media server.
OPTION 1 OPTION 2
7