Operation Procedure - Ruby HD-5BS Manual De Instrucciones

VII. Operation Steps
★

Operation procedure

(1) Get the water tank out of the machine, unscrew the lid and fill the tank with water, then
screw the lid well. Put the water tank on the machine bodysteadily.
(2) Inspect whether the mist outlet nozzle and handle cover are assembled well on the
water tank.
(3) Plug in the power, and then press the on/off switch, the machine starts to work.
(4) Follow below steps to use aroma function:
a. Take out aroma box
b. Use water-soluble aroma oil to drop into the sponge
c. Put the aroma box back into the machine, the aroma function will be on automatically
when turn on the machine
d. To stop the aroma function or when the machine is not in use for a long time, take out
the sponge in the aroma box and clear it, put it back to the machine.
VII. Cleanness & Maintenance

Before cleaning, turn the functional knob point to " OFF", take off the plug

1)Transducer

The water quality in someplace is too hard so that the transducer surface will be easy to
scale formation, The users need to clean transducer with cleaning agent .

Add little cleaning agent on the transducer surface ( More or less depends on the scale ),
then infuse water into the sink to soak the sink fully for 10-15 min.

Clean with brush until scale disappear.

Clean twice with water

☆Don't clean transducer by any metal or stiffness material or scrape it to avoid any
damage
HD-5BS
5