BH FITNESS luxury class Instrucciones De Montaje Y Utilización página 27

CAUTION:
The overall length increases when extending the
length of the footrest with the legrest raised.
Set the length of the footrest to minimum before
lowering the legrest.
This chair has an automatic mechanism that retracts
the footrest when it touches the floor.
8.-
SCAN
Auto-scan control key.
This chair features a scan function which adjusts the
massage position depending on the height of the
user in order to achieve a more effective massage,
shown on the display silhouette.
Each time this button is pressed, the chair begins to
explore the user's back and legs to detect the best
massage position for the user.
Manual up/down control keys.
To provide a more comfortable massage, the user
can adjust the height of the massage rollers by
pressing these keys after using the scan program.
The massage rollers will move up or down depending
on how these keys are pressed to achieve the most
suitable position.
Note: This manual up/down keys can also be used in
the stored programs for selecting different methods of
massage.
9.-
PAUSE
When the chair is in massage mode the user can
press this key to pause the massage function. The
"Pause" icon on the LCD screen will flash and the
timer clock will stop.
The chair is now in the standby mode. Only the
backrest up, raise leg, lower leg movements can be
used while in Pause mode.
Press the Pause key again to resume the massage
function and the timer countdown.
10.-
TIMER/ENTER.
Timer settings.
The default massage time is 15 minutes.
Each time the TIMER key is pressed the timer setting
will change,
"15>20>25>30>5>10" minutes.
One minute before the selected time has elapsed, the
backlight on the control panel will light up followed by
5 beeps to alert the user.
Note: This key can also be used to confirm the
selected time setting in the stored programs.
11.-
ZERO-G
The new zero gravity system positions the chair seat
to 40 degrees, along with the backrest and the
legrest, as a result, the body's weight is distributed
evenly in the massage chair making it possible for the
human body to enter a state of zero gravity, which
the sequence
provides the most sensational yet comfortable
experience during massage.
Press this key to activate the Zero-G function.
You can choose from 3 Zero-G levels; press the
button again to switch to the next Zero-G level.
Press the key again to deactivate it.
12.-
Heat function On/Off key.
Press this key once to switch on the lower back heat
function.
Press the key again to switch it off.
13.-
Seat vibration On/Off key, shown on the display
silhouette.
Press the Vibration key once to switch on vibration.
Press it again to switch it off.
MANUAL MODE.-
Lift the left-hand cover on
the control panel.
The manual keypad for
the various
modes is located at the
top and the air pressure
setting keys are at the
bottom.
27.-
KNEADING
Kneading function On/Off key.
Press the Kneading key once to switch on the full
back massage mode,
silhouette. Press again to switch it off.
28.-
Tapping function On/Off key.
Press this key once to switch on the tapping function
being
for a full back massage at medium speed, shown on
the display silhouette. The speed can be adjusted
using the SPEED key.
Press the Tapping key again to switch it off.
29.-
Roller function On/Off key.
Press this key once to switch on the roller function for
a full back massage. Press the WIDTH key to select
one of the three roller massage width settings, shown
on the display.
Press the ROLLING key again to switch it off.
This function cannot be used for a spot massage.
27
HEAT
VIBRATION (seat)
massage
shown
TAPPING
ROLLING
on the display