Sharp AQUOS LC-50LE650U Manual De Operación página 51

Using a PC
Command format
RS-232C Port Specifi
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits
Parameter 4-digits
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0–9, x, blank, ?
Response code format
Normal response Problem response (communication
error or incorrect command)
O K
E
Return code (0DH)
Command table
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND PARAMETER
POWER ON COMMAND SETTING R S P W
POWER SETTING P O W R 0 _ _ _ Power Off
INPUT SELECTION TOGGLE I
TV I
1-7 I A V D
AV MODE SELECTION
A V M D
VOLUME V O L M
POSITION H-POSITION H-POSITION H P O S
V-POSITION V P O S
CLOCK C L C K
PHASE P H S E
VIEW MODE W I
MUTE
M U T E
SURROUND A C S U
AUDIO SELECTION
A C H A x
SLEEP TIMER
O F T M
CHANNEL DIRECT
D C C H
CHANNEL
(ANALOG)
DIRECT
D A 2 P
CHANNEL
D C 2 U *
(DIGITAL)
D C 2 L
D C 1 0
D C 1 1
CH UP C H U P
CH DOWN C H D W
CC
C L C P
DEVICE NAME T V N M 1 _ _ _
MODEL NAME M N R D 1 _ _ _
SOFTWARE VERSION S W V N 1 _ _ _
IP PROTOCOL VERSION I P P V 1 _ _ _
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• Any numerical value can replace the "x" on the table.
Return code
R R
Return code (0DH)
0 _ _ _ Off
1 _ _ _ On
1 _ _ _ Power On
T G D x _ _ _ (Toggle)
T V D 0 _ _ _
_ _ _ Input terminal number (1-7)
*
* _ _ 0: (Toggle), 1: STANDARD(ENERGY STAR), 2: MOVIE ,
_
3: GAME, 4: PC, 5: DYNAMIC, 6: DYNAMIC (Fixed),
7: USER
_ _
* * Volume (0–60)
_ Only PC mode. (0–100,menu disolay range+/-50)
* * *
_ Only PC mode. (0–40,menu display range+/-20)
* * *
_
* * * Only PC mode. (0–180,menu display range+/-90)
_ Only PC mode. (0–40,menu display range+/-20)
* * *
D E * _ _ _ 0: (Toggle) 1: Normal 2: S.Stretch 3: Zoom 4: Zoom
5: Full Screen 6: Dot by Dot 7: Cinema
* _ _ _ 0: (Toggle), 1: On, 2: Off
* _ _ _ 0: (Toggle), 1: On, 2: Off
_ _ _ (Toggle)
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,
* _ _ _
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
* * * _ The channel number of TV
(1–135)
* * * * (0100-9999)
* * _ (1-999)
* * * _ (0-999)
* * * * (0-9999)
* * * * (0-6383)
x _ _ _ The channel number of TV +1
x _ _ _ The channel number of TV –1
x _ _ _ (Toggle)
Parameter
Input the parameter values, aligning left, and fi ll with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter.)
When the input parameter is not within an adjustable
range, "ERR" returns. (Refer to "Response code format".)
Any numerical value can replace the "x" on the table.
When "?" is input for some
0
commands, the
present setting
0 0 0 9
value responds.
3 0
CONTROL CONTENTS
The Power On command rejected.
The Power On command accepted.
It shifts to standby.
The Power On Command must be waited until system is complately
Power Off (LED power indicator turn to be Red)
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
It input-switches to INPUT1-INPUT7
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the
signal type. The ranges can be seen on the position-setting screen.
0: Although it can choose now, it is toggle operation in available items.
1: Available in [AV] SD timing and [PC] except some timing (*1).
2,3,4: Only available when [AV] signal is being input.
5: Available in [AV] 720p and [PC] except 1280X720,1920X1080 timming.
6: Available in [AV] 1080i and 1080p timming and [PC] except 1600X1200.
7: Only available in [PC] except some timng (*2).
(*1) 1360X768, 1366x768, 1280X1024, 1400X1050, 1600X1200, 1920X1080
(*2) 1360X768, 1366x768, 1280X720, 1920X1080.
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
If it is not TV display, it will input-switch to TV. (same function as CH
If it is not TV display, it will input-switch to TV. (same function as CH
Toggle operation of a closed caption.
The device name set in "IP Control Setup" is displayed.
The model name of the TV
The current version of the TV software is displayed.
The currently supported version of IP protocol is displayed.
?
? ? ? ?
)
)
49