Panacom M62 Manual Del Usuario página 8

WIRELESS BT CONNECTION
1. Switch the speaker system to BT mode and activate BT Function on your phone
and press search. Select the appropriate speaker system and press connect.ln
case,you are prompted from a pass word,key in the preset password '0000' in your
phone and press connect. Once the connection is successful,you will hear an alarm
sound from the speaker.
2. Manualiy select BT device in sorne of mobile phone which contains many
different BT device.
3. BT device connection is point to point type.When speaker system is connecting
one mobile phone,the other mobile can not be connected to speaker system.You
have to disconnect current connection and set up a new connection.
4. When switch the speaker system to other mode, such as USB ar SD/MMC
mode,the connection between mobile phone and speaker system will be
disconnected and BT will clase down.When switch back to BT mode,the BT
connection will resume automatically in 3-5 seconds. lf not, setup connection
manually once again.
5. The standard workable distance for BT is 1O mtrs without barriers.
6. There should be different workable distance, sound quality and noise depending
on different mobile phones.
7. When playing music with BT mobile phone,when there is a call, the BT will
disconnect from speaker system automatically. The BT connection will resume
automatically after phone call.
Pg. 8