Quick Setup Guide; Box Contents - Gemini MS-USB Manual De Instrucciones

QUICK SETUP GUIDE

1. Make sure all items listed in this guide are included in the box:
2. READ SAFETY WARNINGS BEFORE USING THE UNIT.
3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE
BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE.
4. Study this setup diagram.
5. Place product in an appropriate position for operation.
6. Make sure all input devices such as microphones, CD players, MP3 players, and linked amplifiers/PAs are
turned off and volume settings are set at "zero".
7. Connect all devices as shown in the diagram.
8. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio sources.
9. Switch everything on in the following order:
• Connect audio input sources (i.e. microphones, instruments, CD/MP3 Players)
• Turn on amplifiers
10. When turning off, always reverse this operation by:
• Turn off amplifiers
• Disconnect any audio input devices
(Microphone included)
Quick Setup
4
Instalación Rápida | Guide de Démarrage Rapide | Anschlüsse
MS-USB SETUP GUIDE - EN
(cable sold separately)
OR:

BOX CONTENTS:

* MS-USB Amplifier
* (1) Microphone
* (1) Power cable
To RCA input
(cable sold separately)
(MP3 player not included)