power2max NG Guia De Inicio Rapido página 4

Warning
Before installation and use, please thoroughly read our user's manual!
Improper installation can cause accidents. In case of doubt, contact a
professional bicycle mechanic. Observe the indicated torque values
when installing screws and bolts. (See installation instructions at
www.power2max.com.)
Before going on a ride, get to know the functions and operation of your
power meter. Get a checkup from a sports physician before starting your
training program. Pay attention to traffic and road conditions before
checking any data.
Quick start guide
Thank you for choosing a power2max NG power meter! For installation,
please download the installation instructions: www.power2max.com
Included:
power2max NG power meter
USB power cable
Quick Start Guide including inspection certificate
Optional:
NG colored ring
USB charging unit
Installation tools
Crankset
Bottom bracket
Chainring set
Chainring bolts
6
Installation and operation:
- First, completely charge the power2max NG power meter:
- Open the USB cover.
- Connect the charging unit to the power2max NG power meter via the USB
cable (the LED indicator light is red during charging).
- Charging is complete when the red LED indicator light turns off.
- Remove the USB cable from the power2max NG power meter. The LED
indicator light blinks green. Close the USB cover and connect the power
meter to your bike computer or your Bluetooth-enabled smartphone
(observe manufacturer's instructions).
- Install chainrings onto the power meter. (Installation instructions at
www.power2max.com.)
- Install the power meter at the crank. (Installation instructions at
www.power2max.com. Observe manufacturer's instructions for torque
values!)
- Install the crankset on the bicycle. (Installation instructions at
www.power2max.com. Observe manufacturer's instructions for torque
values!)
- After installing, check the function of the front derailleur and adjust as
necessary.
Finished!
Now: go ride and have fun with your power2max NG!
7