Publicidad
Idiomas disponibles
Idiomas disponibles
1-5 TECHNICAL SPECIFICATIONS
DESCRIPTION
Blade diameter (mm)
Hole diameter (mm)
Size of driving shaft (mm)
Three-phase motor power (Kw)
Single-phase motor power (Kw)
Motor revs (r.p.m.)
Intake opening on blade guard (mm)
Intake opening on back hood (mm)
Table size (mm)
Max cutting length (mm)
Max cutting length max (mm)
Max height cutting width (mm)
Max height cutting width (mm)
Max cutting height (mm)
Max cutting height (mm)
Max blade height from plane (mm)
Max blade height from plane (mm)
Max blade cutting height at 45° (mm)
Max blade cutting height at 45° (mm)
Max cut with arm at 45° (right) (mm)
Max cut with arm at 45° (left) (mm)
Net weight (Kg)
Gross weight (Kg)
Size of package (mm)
8
Junior 640
Big 800
Ø 350/400
Ø 350/400
Ø30
Ø 30
Ø25x80
Ø 25x80
3
3
2,2
2,2
2800
2800
Ø60
Ø 60
Ø100
Ø 100
975x1580
1145x1860
[Ø350]
20x550
20x710
[Ø400]
20x545
20x705
[Ø350]
100x480
100x640
[Ø400]
125x450
125x610
[Ø350]
100
100
[Ø400]
125
125
[Ø350]
70
70
45
45
[Ø400]
[Ø350]
60
60
[Ø400]
80
80
20x380>100x330
20x500>100x450
20x190>100x140
20x310>100x260
180
198
220
246
1400x850x590
1400x850x590
1-6
It is recommended for the radial arm saws
machines to be exclusively used for the opera-
tions described in this manual, including nor-
Best 960
Best 1250
mal maintenance operations.
Ø 350/400
Ø 350/400
Ø 30
Ø 30
Ø 25x80
Ø 25x80
The machines are designed in particular for
3
3
perpendicular and 45
2,2
2,2
2800
2800
ence to the abutting square.
Ø 60
Ø 60
Ø 100
Ø 100
1290x2000
1580x2400
20x870
20x1160
20x865
20x1155
100x800
100x1090
125x770
125x1060
100
100
It is therefore advisable to look the instruc-
125
125
tion manual over before assembling the
110
110
machine. Any modification, use or inter-
85
85
60
60
vention other than those provided for rep-
80
80
resents an anomalous condition which,
20x615>100x565
20x800>100x770
besides damaging the machine, can be ex-
20x425>100x375
20x610>100x580
269
285
tremely dangerous for the operator.
331
347
1500x1000x550
1800x1000x630
INTENDED USE
WARNING
°
cutting with refer-
WARNING
Publicidad
Capítulos
