Cooper Greengate PPS-5 Instrucciones De Instalación página 3

Low
Voltage
Switch
Inputs
Figure 7. ControlKeeper 2 Connection
Outdoor Contact Input Photosensor
Adjusting the PPS-5
A slide adjustment has been provided to change the
switchpoint of the PPS-5 sensor. If the sensor is triggering
too late, move the slide bar over the window until the
desired timing is achieved. Optimally, it is best to make
PPS-5
the adjustment to the slide bar when the light level is at
the switching point. Move the slide bar across the window
until the lighting turns ON. There is a 2-3 second time delay
before lights are switched when the threshold is reached.
White (ON)
Red (+24 VDC)
Black (Ground)
Sensor Window
Adjusting the PPS-5
Slide Adjustments
Move Slide Adjustments
Over the Sensor Window
to Make Sensor Trip Earlier
3