Record Mode - Fenton VX2USB Manual De Instrucciones

OVERVIEW
1. POWER ON/OFF SWITCH
Push this button to turn power ON and OFF, the button
lights red when the power is on.
2. DISPLAY
Display indicate the most important settings and data such
as track number, track title and folder name, playing time
and other information.
3. SD CARD FLASH DRIVE
The connector to insert the SD CARD.
4. USB FLASH DRIVE
The connector to insert the USB flash drive.
5. TRACK/FOLDER KNOB
Turn the knob clockwise to search the tracks. Press this
button, display shows " FOLDER", then the function of the
knob is "FOLDER SEARCHING".
Press this button again to exit "FOLDER SEARCHING"
function.
6. MODE FUNCTION
Press this button to switch between SD or a USB device.
15. GROUND
Ground screw
16. CHANNEL 2 AUDIO OUTPUT
Connect with RCA cables for Channel 2 output.
17. MIXER AUDIO OUTPUTS
Connect with RCA cables for channel 1 & channel 2 Mixed
output.

RECORD MODE

Press the "MODE"-button for record function and confirm by pressing
Mediaplayer 2 and create automatically a "RECORD"-folder.
Press the "MODE"-button again to return and play the record. Press
Noted: Mediaplayer 1 has BT function only, use Mediaplayer 2 to record the music from BT.
7. PLAY / PAUSE
Press this button to play or pause the music.
8. STOP
Press this button to stop the music.
9. REPEAT
Press this button to repeat the selected track or to repeat
all tracks.
10. PREVIOUS TRACK
Press this button to play the previous track.
11. NEXT TRACK
Press this button to play the next track.
12. HEADPHONE VOLUME CONTROL
Turn this knob to adjust the volume of the headphone.
13. HEADPHONE INPUT
Headphone input 6.35mm.
14. SIGNAL SELECTOR
Press this button to monitor the CH1 or CH2 output.
18. CHANNEL 1 AUDIO OUTPUTS
Connect with RCA cables for Channel 1 output.
19. POWER SOCKET
Make sure to connect the power supply to the suitable
power.
button. The unit will record from the USB or
or button to choose previous or next recorded track.
3