Schwaiger WALED 10 Manual De Instrucciones E Indicaciones De Seguridad página 14

USER MANUAL
6. Recharging the LED warning light
Turn off all lights before charging.
The LED warning light can be recharged using the supplied
12 V car charger or the 230 V mains charger. The battery
needs to be charged before using it for the first time. Con-
nect the magnetic connector hub to the LED warning light by
placing the metal contact points on the magnetic connector
hub onto the screws in the LED warning light (on the rear of
warning light). The (+) and (–) marks are located on the
magnetic connector hub and next to the screws in the LED
warning light. Always ensure you place the poles in the right
position. The (+) and (–) marks on the magnetic connector
hub and the LED warning light must always match.
12 V car power supply unit
Connect the USB charging cable to the magnetic connector
hub and to the 12 V car power supply unit. Connect the 12 V
car power supply unit to the corresponding socket.
230 V mains charger
Connect the USB charging cable into the magnetic connector
hub and into the power supply unit for 230 V sockets. Connect
the 230 V power supply unit to the corresponding socket.
14 14