Warning and Power off switch
Before plugging in and switching on the calculator, check that the rated voltage indicated
on the rating label on the bottom corresponds to the local voltage.
The power off switch is the selector at the top left of the keyboard.
Replacing ribbon spool
1.
Remove printer cover.
2.
Remove ink ribbon
3.
Insert new ink ribbon.
4.
Close printer cover.
Loading paper
1.
Plug in the calculator and turn it on.
2.
Cut, or tear evenly, the end of the
paper roll to get a straight, even edge
for proper feeding under the print
head.
3.
Holding the paper roll in one hand,
feed the paper from the bottom of
the roll and insert it the paper slot at
the back of the calculator.
4.
Press paper feed key until the paper catches and advances through the printer.
5.
Fit the paper roll between the pair of paper holders.
ENGLISH
1