Torque Wrench - RAWLINK 80023 Manual De Instrucciones

TORQUE WRENCH

Introduction
To get the most out of your new torque
wrench, please read this manual and safety
instructions before use. Please also save the
manual in case you need to refer to it at a
later date.
Technical data
Setting range: 40-210 Nm (4.3-21.4 kgm)
Accurate to within:
Ratchet function
Main components
1 . Storage box
2 . Lock Nut
3. Handle
4. Fine adjustment scale
5. Torque scale
6 . Direction changer for ratchet function
7. Heads
8. Extensions and adapter
1
7
14
+/-4 %
6
Special safety instructions
Never over-tighten bolts with the wrench,
as it can damage the bolt resulting in
potentially dangerous situations.
Do not use to loosen bolts, screws or
the like, as the ratchet function can be
damaged.
Use
Set to the required torque moment by
slackening the lock nut (2) and turning
the handle (3), until the zero on the � ne
adjustment scale (4) is in the cross between
the horizontal and vertical line at the
required moment on the torque scale (5)
NB! The left scale shows torque moment in
Nm, the right in kgm.
Turn the handle clockwise or anti-clockwise
to � ne adjust torque moment and lock the
nut.
5 5 4
3 2
8