Progressive Electronics PE395 Manual De Instrucciones página 6

Operation
TALK
Press once to go off-hook (connect). Press again to go on-hook (disconnect).
MONITOR
Press momentarily to monitor the line. Monitor will remain on while connected to the line. The
Monitor mode shuts off automatically approximately one minute after disconnecting.
MUTE
Press and hold to stop transmitting over the line or to eliminate sidetones. Release to talk.
Dialing Features
PULSE
Pulse Dialing
Connect the PE395 to the line. Press PULSE, then press TALK to go off-hook. Press
change to tone dialing.
Note: The PE395 will default to tone dialing after the line is disconnected.
FLASH
Flash
Press FLASH once momentarily to flash the line.
LNR/PAUSE
Last Number Redial / Pause
Last Number Redial: Press LNR/PAUSE once after going off-hook to dial the most recently
called number.
Pause: Press LNR/PAUSE after any digit in a dialing sequence to insert a four-second delay.
Pauses will be repeated by the LNR function, and can be stored in memory.
6
to