Features
•
Talk function parent unit (receiver) / baby unit (transmitter)
•
Infrared night vision
•
Lullabies
•
One parent unit can monitor up to 4 baby units simultaneously
•
Temperature monitoring
•
Vibration
•
Day / night mode: when the night mode is switched on, the range alarm is
switched off. The night mode should only be used when parents and baby units
are in fixed positions (eg in the bedrooms) and you have previously made sure
that the distance between these two locations is not too great and that the
connection works without problems.
Package content
•
1 Baby unit (transmitter)
•
1 Parent unit (receiver)
•
1 Adapter
•
2 USB cables
•
1 User guide
Installation instructions
•
Place the baby unit (transmitter) at least 1 m away from your baby.
•
The parent unit (receiver) should be at least 2 m away from the baby unit to avoid
feedback.
Intended use
The surveillance system has been developed to monitor rooms. The transmitter sends
acoustic and video signals from its point of installation to the receiver. Any other use
is considered unintended use.
The use of this equipment does not substitute personal supervision, e.g. of a child.
Users are not relieved of their personal liability. Unauthorised modification or
reconstruction is not permitted. Under no circumstances open the device or complete
any repair work yourself.
Maintenance
•
Clean the housing surfaces with a soft, fluff-free cloth.
•
Never use cleaning agents or solvents.
6
Technical data
•
Frequency / No of channels 2,4 GHz / 19
•
Modulation
•
Screen
•
AC adaptor
•
Baby unit power
•
Parent unit sensitivity
•
Parent unit battery
•
Battery life
•
Battery charging time
•
Temperature range
•
Storage temperature
•
Number of lullabies
Using the parent unit (receiver)
Setting the vibration
•
Vibration only: Adjust the volume to "0".
Vibration and audio alarm: hold the Screen display on/off button down, and tap
•
right arrow ( ►) for 5 seconds to turn on/off.
Out of range alarm
•
Parent unit exceeding range:
red/green light flashes.
Low battery alarm
•
The parent unit's battery is nearly exhausted:
you hear a beep every 30 seconds and the red light flashes.
Temperature alarm
•
The temperature in the baby room is outside the range:
you hear a beep every 30 seconds and "LO" (temperature < 16° C) or "HI"
(temperature > 30°C) flashes in the display.
Setting the temperature alarm
•
Hold the Screen display on/off button down, and tap left arrow (◄ ) for 5
seconds to turn on/off (1 beep: on / 2 beeps: off).
FHSS
2,4" (6 cm) TFT LCD
Model: (EU) HJ-0500500P1-EU
(UK) HJ-0500500-CE
ShenZen HuaJin Electronics CO., LTD
Input: 100~240 V, 50/60 Hz, 0.15 A
Output: 5 V, 500 mA
19 dBm
-83 dBm
LiIon, 1,600 mAh, 3.7 V
ca. 7 - 9 hrs.
ca. 4 - 8 hrs.
10° - 40° C
-10° - 70° C
8
7