AEG MRC 4142 Instrucciones De Servicio página 49

7 MEMORY button
8 button
9 /M button
10 Indicator for activated alarm function ( )
11 Indicator for activated alarm function ( )
12 Indicator for radio switched on (FM)
13 LED display
14 Indicator for activated "delayed switch-off" function (SLEEP)
15 Indicator for activated "snooze" function (SNOOZE)
Back side (not shown)
DC 5 V power supply connection
Dipole antenna
Bottom side (not shown)
Battery compartment (power reserve)
First Use of the Device/Introduction
• Select a proper place for the device. A dry, level and slip proof surface is suitable.
• Make sure the device is vented sufficiently!
• Remove the protective film from the device, if present.
Power supply
• Make sure the grid voltage corresponds to the figures on the rating plate.
• Plug the power supply unit into a properly installed protective contact socket.
• Connect the device with the power supply unit by plugging the jack of the power sup-
ply unit into the "DC 5 V
CAUTION:
• This device should only be used with the mains supply unit (included). Do not use it
for other devices.
• Only use a 5 V power supply unit (
device.
" jack.
). A different supply unit may damage the
English
49