Mogatec HSDN 600 Profi Instrucciones De Manejo página 19

2. General safety instruction
Usage of hedge trimmer always involves
a risk of accidents, therefore please
observe the relevant accident prevention
instructions.
The machine has been constructed according
to the latest technology and in accordance
with the recog-nised
regulations. Nevertheless, use of the machine
can involve risks to the user or third persons,
and can cause damage to the machine or
other objects.
Attention: Using electric power tools, you
must observe following fundamental safety
instructions to protect yourself against electric
shock, against danger of injuries and danger
of fire. Read all these instructions before
using the hedge trimmer and observe them.
Keep these safety instructions at a safe place.
Use the machine in a safety conscious manner
for suitable applications in a technically
perfect condition only and with due regard
to the operating instructions! Immediately
rectify or have rectified any faults which could
adversely affect safety!
This machine may cause serious injuries.
Please read the instruction manual carefully
as to the correct handling, the preparations,
the maintenance and the proper use of the
hedgetrimmer. Familiarize your-self with the
machine before the first use and also have
yourself introduced to practical use of the
machine.
This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
3. Application
The machine is only intended for trimming
hedges. Use for any other purpose consti-
tutes inappropriate use. The manufacturer /
supplier is not liable for any injury and/or dam-
age arising from inappropriate use. This risk is
technical safety
GB-3
the sole responsibility of the user. Appropriate
use of the machine also includes adherence to
the operating instructions and compliance with
the servicing and maintenance instructions.
Always keep the instruction manual close at
hand during operation!
4. General safety instructions
Attention! Read all instructions con-
tained herein. Failure to observe the fol-
lowing instructions may result in electric
shock, burns and/or severe injury.
The term 'power tool' used in the following in-
cludes both mains-operated tools (with mains
supply) and battery-operated tools (without
mains supply).
1) Working area
a) Keep your working area clean and tidy.
Untidy and poorly lit working areas may
lead to accidents.
b) Do not operate the tool in potentially
explosive environments containing
combustible fluids, gases or dusts.
Power tools generate sparks that may
ignite dusts or fumes.
c) Keep children and other persons away
when you are operating the power tool.
Distractions may result in the operator
loosing control over the tool.
2) Electrical safety
a) The mains plug of the power tool must
fit into the mains socket. The plug must
not be modified in any way. Do not use
adapter plugs/connectors in combina-
tion with tools with protective earth-
ing. Unmodified plugs and fitting sockets
reduce the risk of electric shock.
b) Avoid physical contact with earthed
surfaces as pipes, heaters, ovens and
refrigerators. There is an increased risk
of electric shock if your body earthed.
c) Keep the tool out of the rain. The pene-
tration of water into a power tool increases
the risk of electric shock.
d) Do not use the cable to carry or hang
up the tool or to pull the plug out of the
socket. Keep the cable away from heat,
oil and sharp edges or moving parts