BabyGo TravelXP Manual De Instrucciones página 13

BabyGO
Installing and uninstalling the baby car seat in
your stroller
How to use the car seat
1. Install baby car seat: First lake off the fabric
cover from two side handrails. Adjust the back
to the second position (150). Put the connec-
tors on the each sides handrails till you hear
"click". Then put the baby car seat on the strol-
ler by connectors. (See picture)
2. Uninstall baby car seat: Press the red part on
two connectors. Pull the baby car seat away
from the connector. (See picture)
7. Loose the shoulder belts by pressing the quick
adjuster button and pulling the shoulder belts
towards you as shown in picture 7, then put
down the crotch strap as shown in picture 8.
8. Join the buckle tongue sections together end
insert them into the buckle as shown in picture
9.
BabyGO • www.babygo.eu
Baby car seat
TravelXP
13