Important; Alessitab² Key; Position Of The Alessitab² Key - Promelit ALESSI TAB 2 Manual De Uso

Connect the power supply to the Tablet before using it for the
first time.
When the power supply is connected to the Tablet, the red led below
the display remains on until the termination of the recharging process.
Once at least 8 hours of recharge are elapsed, it will be possible to
disconnect the power supply and use the AlessiTab² with the
onboard battery, then it will be necessary to reconnect the power
supply to the Tablet to start the direct recharging. As an alternative,
connect the power supply to the Base and place the Tablet on it (3.4).
The internal battery of the Tablet can be replaced exclusively
by an authorised servicing centre.
Any attempt to open the device performed by non authorised
personnel will void the warranty of the product.
1
2
3
4
3.2 ALESSITAB² Key
The ALESSITAB² key allows to switch on and off the AlessiTab², as
well as to access the menu of contextual options available in the
single application (see below).
Position of the ALESSITAB² key
When the Tablet is used in a standalo-
•
ne configuration (disconnected from
the base, with the battery or with the
power supply connected to the
Tablet), the "ALESSITAB²" key is
located in the lower part of the Tablet
(fig.3).
Model's User Manual

IMPORTANT

1) Capacitive 10.1" Touch-screen
2) Photo/Video camera
3) Integrated Microphone
4) Red LED for power supply connected
/battery operation:
- The LED is illuminated (red) when
AlessiTab² is connected to the mains
power supply;
- The LED turns green when the tablet
is fully charged.
Fig. 3
2