OK. OPK 500BT-B Manual De Instrucciones página 24

EN
Audio input
11 This mode allows you to use the product as a speaker for an external device (e.g. mobile phone or
MP3 player).
Warning! Observe the relevant safety information for use with other devices when connecting an
external device.
1. Connect the cinch plug (3.5 mm) of the audio cable with the audio playback device and the
other cinch plug (3.5 mm) into the AUDIO INPUT-jack of the speaker.
2. Press the mode button INPUT until LINE appears on the display. The product is in AUDIO INPUT
mode.
3. Turn on the audio playback device and start the music playback.
4. Adjust the volume with the volume control knob or on your playback device.
USB-Playback
12 1. Plug in an USB drive. The speaker reads the USB data immediately and starts the playback with
the rst track.
2. Press the
3. Use the to pause or continue the playback.
4. You can adjust the volume with the volume control knob.
Note
• Support USB drive up to max. 32 GB.
• The order of the playback is determined by the order of the folder.
• Connect the USB device directly to the USB port of your product. The usage of an extension cord
is not recommended and may cause product interference and faulty data transfer. This product
supports USB 1.1 and 2.0.
microSD card
13 1. Insert a micro SD card into the micro SD card slot. Independent from any operation mode the
display will show Lod and the speaker switched to SD card mode.
2. The speaker reads the SD card immediately and starts the playback with the rst track.
3. Press the
4. Use the to pause or continue the playback.
5. You can adjust the volume with the volume control knob.
Note
• Support microSD card up to max. 32 GB.
• The order of the playback is determined by the order of the folder.
IM_OPK 500BT-B_151023_V04_HR.indb 24
button to skip a title forward or backward.
button to skip a title forward or backward.
24
23/10/15 9:40 AM