1. Open the battery compartment on the bottom
of the scale.
2. Insert 2 batteries of type AA/R6. Please ensure
that the polarity is correct (see the loor of the
battery compartment)!
3. Close the battery compartment again.
Using the Scales
The kitchen balance was developed to display the
weight of food and ingredients.
Display Indication
TARE
Ready to weigh
ZERO
Lo
Battery Low
Err
Overload
UnSt
Not standing on a stable surface
Switching On
1. Place the scales on a flat, smooth surface.
2. Place the bowl onto the scale.
3. Press the ON/Z/T button.
All segments are briefly illuminated in the
display followed by "0".
Weighing
• Use the UNIT button to select the desired unit
of measurement: "g", "lb:oz", "ml" or "fl.oz".
• Fill the bowl with the ingredients to be weighed.
The result will be displayed.
Tare Function
If you would like to add a further ingredient to the
first ingredient and then weigh it:
• Press the ON/Z/T button briefly.
• The scales are reset to "0".
• If you now place further ingredients on the
scales their weight is displayed.
20
Switching Off
NOTE:
• The display background light will turn off after
approx. 45 seconds in order to save energy.
• With the automatic switch-off the scales turn
off automatically after approximately 160 sec-
onds.
If you want to turn off the scale earlier, press and
hold the ON/Z/T button for approx. 3 seconds.
Periods of non-usage
If you do not use the appliance for a longer period
of time, remove the batteries in order to prevent
"leakage" of battery acid.
Cleaning
CAUTION:
• Do not immerse the appliance in water: the
electronic components can be damaged.
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
• Clean the device with a slightly moist cloth.
Make sure that no humidity or waters seeps
into the device!
• Dry the device well after cleaning with a dry
and soft cloth.
• Clean the bowl in warm soapy water. Dry
thoroughly afterwards.
Storage
Keep the appliance in a clean, dry place.