Hand Blender; Electrical Safety; Product Safety - Roadstar HB-130 Manual De Instrucciones

HB-130

Hand Blender

INTRODUCTION
Thank you for purchasing this product
You may already be familiar with using a similar product, but do please take time to read
these instructions - they have been written to ensure you get the very best from your
purchase.
Safety is Important
To ensure your safety and the safety of others, please ensure you read the Product Safety
and Electrical Safety information before you operate this product.
Please pay particular attention to the sections of
this guide that carry this warning symbol.
Keep this information in a safe place for future reference.
English
D
1 2 English
PARTS
Hand Blender
A. Motor Part
B. High Speed & Low Speed Button
C. Blender shaft with Blade
D. Support Bracket
Whisk Attachment
E. Whisk gear box
F. Whisk
Chopper attachment
G. Chopper gear box
H. Chopper blade
I. Chopper bowl

ELECTRICAL SAFETY

CAUTION
Read these safety instructions thoroughly before connecting this product to the mains
supply. Before switching on, make sure that the voltage of your electricity supply is the same
as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz.
Connecting it to any other power source may cause damage.
If the plug has to be changed because it is not suitable for your socket, or due to damage,
it should be brought to a Service Center or to your dealer.

PRODUCT SAFETY

When using any electrical appliance, basic safety precautions should always be
observed, including the following:
• Remove the Hand Blender and all enclosed accessories from the box.
• Remove all of the packing materials carefully and completely.
• Read all instructions carefully and completely, before operating. Retain them for future
use.
• To protect against electrical shock do not immerse cord, plug, or motor unit of hand
blender in water or other liquid.
• Close supervision is necessary when appliances are used by or near children.
• Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, is dropped or is damaged in any manner. Examination of this unit by an
appliance service professional is obligatory in any of the aforementioned instances.