Satlink FB250 Manual De Usuario página 126

1. Using the keypad on the Primary Handset, enter the SIM PIN.
2. Press to confirm the SIM PIN.
If more than three (3) incorrect attempts were used to enter the PIN code, the
handset will be locked and will display "xxxxxxxx". You will be required to us
the PUK code to unlock the SIM card and to reset your PIN code.
MAKING THE FIRST VOICE CALL
To make a call, you must be connected to a network
When the ADU Status and Network Status LED indicators on the
terminal both light steady green, you are ready to make or receive the
first voice call.
To make a call from the Primary Handset, dial:
I
00 <country code> <phone number> followed the
For international calls and SMS, press and hold the
key until '+' is displayed, then enter <country code> and <phone number>
I
To end the call, press
I
To accept an incoming call, press
To make a call from an analog phone (optional) connected to the
FB250 UE Phone port, off-hook the phone and dial,
I
00 <country code> <phone number> followed by the # key
SENDING THE FIRST SMS (MESSAGE)
Follow these steps to send the first SMS:
and have an adequate SAT signal.
without using the leading "00".
on the Primary Handset.
on the Primary Handset.
ww.satlink.es
key.
125
N