Tanita Step Manual De Instrucciones página 8

EN
Usage 6. System reset
Be sure to reset the system in the following situations:
• After taking the battery out.
• After replacing the battery.
• If the display screen has malfunctioned.
• If the switches do not work.
After a system reset, all data are initialized. To continue using the instrument, carry out initial settings.
Notice
Steps, calorie consumption, distance and walking time cannot be restored after a system reset.
8
1. While steps and time are displayed
* Or during display of calorie consumption and time, or of distance
and walking time
2. Press the Mode button and the Set button on the side of the
instrument for at least 3 seconds.
Use a pointed implement to press the Set button.
3. Once all display elements have disappeared,
4. Release the Set and Mode buttons.
All display elements light, then
5. Go out.
System reset is complete.