Orbegozo CU 6500 Manual De Instrucciones página 8

CU 6500
SPECIFIC SAFEGUARDS
• Check if the voltage of the appliance corresponds to the
main voltage of your home. Rated voltage: AC220-240V
50Hz.
• Place the device on a flat stable surface.
• Never use the appliance near a sink filled with water or
other liquids.
• If the device has fallen into the water never try to hold it,
but pull the plug from the socket.
• Never use the device for opening cans of flammable
liquids.
• The can opener shall not operate for more than 5
continuous cycles and the interval between each two
cycles shall be at least 15s.
USE
Remove the unit and blade bracket from the package before the first time use.
1. To attach blade bracket to the can opener, make the key tabs align with the key slots, push it frontward
to fix it (fig 1), then press down the blade bracket to ensure it has been assembled in place (fig 2). Then
lift the blade bracket.
2. Connect to power source.
3. Turn the lever up and put the can under the retainer axis and against the control wheel. Push the lever
down and pierce the can, the machine will start working now. Keep pushing on the lever; the device will
automatically stop when the lid is fully opened.
NOTE: The can required to be opened shall be 50mm to 100mm in diameter and 178 mm max in height.
In the case total weight of can is over 510g, it is necessary to press and hold the can opener to avoid
overturning.
8