Oster FPSTBW8055 Manual De Instrucciones página 12

TO OPERATE YOUR ELECTRONIC WINE OPENER
The wine opener is operated by the simple press of a
switch (Figure 1).
Before removing the cork you must remove any foil from
the bottle using the foil cutter provided (Figure 2).
1. Place the wine opener on top of the wine bottle making
sure that it remains as upright as possible at all times.
If you hold the wine opener at an angle to the bottle it
will not remove the cork
properly (Figure 3).
2. Hold the wine opener firmly and depress the lower
part of the switch. The corkscrew spiral will turn in a
clockwise direction and enter the cork, then gradually
remove it from the bottle. When the wine opener
mechanism has stopped the cork has been fully
removed from the bottle
3. Lift the wine opener away from the
bottle. To remove the cork simply depress the upper
part of the switch. The spiral will turn in a counter-
clockwise direction and release the cork (Figure 4).
NOTE: It has been noted that the wine opener may
experience problems with a small percentage of plastic/
synthetic corks and undersized corks, if in this case the
cork should be removed from the bottle manually.
Upper Switch
Lower Switch
En g lish -5
Figure 1
Figure 2
Figure 3
Figure 4