Product Description; Safety Instructions - Engel MV 7127 Manual De Usuario

PRODUCT DESCRIPTION

Modulator MV7127 is intended to from TV channels of B/D/N in VHFI range.B/D/L/M/N
standards in VHFIII+S2 range and G/K/L/M/N standards in UHF range,Broadcasting signal has
double sideband modulation.The modulator are intended for indoor only.

SAFETY INSTRUCTIONS

The modulators is powered from mains 230V. This voltage is dangerous to life.
Any repairs must be done by a quali ed personnel.
To avoid the electric shock follow these instructions:
• Do not remove the cover of the power supply section,without isolating the unit from the
mains supply.
• Do not plug the modulator into the mains supply if the power cord or plug are damaged.
• Do not plug the modulator into the mains supply until all cables have been connected
correctly.
• To disconnect the modulator, disconnect plug from mains socket.
• The mains socket must be easily accessible.
• Modulator shall not be exposed to dripping or splashing water and no objects lled with
liquids, such as vases, shall be placed on it.
• Avoid placing modulator next to central heating components and in areas of high humidity.
• No naked ame sources, such as lighted candles,should be placed on modulator.
• If the modulator has been kept in cold conditions for a long time,keep it in a warm room no
less than 2 hours before plugging into the
• The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, tabel-cloths, curtains.
• Mount the modulator in vertical position with RF connectors underneath.
• From top, front and bottom of installed modulator must be at least 10 cm free space.
28