Settings Menu - AEG DAB+ 4154 Instrucciones De Servicio

English
44 44
Show FM information
Press the INFO / MENU button to show the following infor-
mation, if broadcasted by a radio station.
• Radio Text is shown by default on the display. If no
information is available, [No RadioText] appears on the
display.
• The program type (PTY) of the station is displayed (e.g.
Pop music, news etc.). If no PTY is received, [No PTY]
appears on the display.
• Display of the signal strength
• Display of time and date
Scan DAB stations
Digital Audio Broadcasting (DAB) is a digital broad casing
standard for terrestrial reception of digital radio. A list of radio
stations which can be received in Germany is available on the
Internet at www.digitalradio.de.
NOTE:
In Germany approx. 70% of the country' s area is covered by
digital radio broadcasts (as of Nov. 2011). In the individual
areas however, coverage and provision vary greatly. If the
DAB stations in your region cannot be received or only with
interferences depending on location, in this case you can
switch to the FM band to receive this station. This is only
possible however if these stations are broadcast via VHF.
Find out more on the internet site of the radio station.
1. Press the STANDBY / FUN button repeatedly until
"Welcome to DAB" appears on the display.
2. Keep the PRESET / SCAN button pressed. The device then
searches for the radio stations which can be received.
3. You can select the next or the previous station by using
the / buttons. Confirm your selection with the
ALARM / ENTER button.
4. If the reception is too weak and the received station
"motorboats", try to improve the reception by changing
the position of the antenna.
NOTE:
To manually set a DAB frequency, proceed as described in
the "Settings menu" sections.
Display Additional DAB Information
In DAB mode, you can display the following additional
information if broadcast by the radio station. To do so, press
the INFO / MENU button.
The DLS text is shown on the display by default.
• DLS: Short for Dynamic Label Segment. This involves
complementary data. This content may be e.g. informa-
tion about the station or the music title and artist being
played.
• This indicates the station category (e.g. Pop-Music, News
etc.).
• Displays the name of the station group (e.g. DR
Deutschland).
DAB+4154_IM
• Display of time and date.
• Frequency of the current radio station.
• Displays the digital Audio Bit Rate.
• Displays the received signal strength.
• The "SIGNAL ERROR" display shows the signal quality.
The lower the adjacent figure, the better the quality.
Save Station
1. After having found the desired station, press the PRE-
SET / SCAN button. The first preset location appears
on the display. In case of still empty storage space, the
notification "Preset 1 empty" will appear.
2. For choosing the memory position, press / buttons.
3. To save it, keep the ALARM / ENTER button pressed. The
notification "Station 1 saved" will briefly appear on the
display.
Select a Preset Station
1. Press the PRESET / SCAN button.
2. For choosing the memory position, press / buttons.
3. Confirm your selection with the ALARM / ENTER button.

Settings menu

Numerous settings are made via the Settings menu (see
page 4).
In the Settings menu you can find the main menu and the
related submenus with the individual options.
To enter the menu, keep the INFO / MENU button pressed in
DAB or FM mode.
• Use the / buttons to navigate in the menu.
• Use the ALARM / ENTER button to select a submenu, or
confirm a setting.
• To exit the menu, press the INFO / MENU button.
NOTE:
• If you do not press any button within 20 seconds, the
menu is hidden.
• The currently set option is highlighted by " ".
A Settings menu can be found in DAB mode, as well as in
FM mode. The DAB and FM menu is explained below along
with the general MAIN MENU menu.
DAB Menu
The DAB menu is divided into menus:
• Local scan: Starts the stations scan. The DAB frequency
band is scanned for local stations.
• Full scan: Starts the station scan. The DAB frequency
band is scanned for stations.
• Manual tune: To do so you need to know the station
frequency. This can be found on the internet site of the
broadcasting service. Select the individual frequencies
with the / buttons. Start the manual scan by pressing
the ALARM / ENTER button. The station group will appear
25.05.16