Factory Reset - OK. OMH 600 Manual De Instrucciones

cHarging uP iPOD anD iPHOne

factOry reSet

In case that you need to reset the unit back to its original factory settings,
please do as follows:
1. Disconnected unit from the AC mains; reconnect after a few seconds. Unit
will be standby mode.
2. Within the first 5 seconds of standby, press and hold MENU button. At the
same time press STANDBY button once.
3. Release both buttons when the display shows RESET.
4. The unit is then reset to its factory settings. All of the pre-set radio stations,
clock and timer settings need to be set again.
57
The iPod and iPhone will be automatically charged
when docked, in either standy or operation mode.
en