Steren MIX-150 Manual De Instrucciones página 17

13. PAN CONTROL (Panoramic)
Determines the amount of signal sent to each side of the mixer (right or left). In the middle position,
the signal will be directed to the middle of the stereo space.
14. PEAKS LED INDICATOR
Illuminates when the input signal is too high and saturated. Adjust this signal to avoid saturation or
distortion.
15. CHANNEL VOLUME
Controls the volume of each channel in the final mix.
16. LINE / USB INPUT SELECTOR
Selects input signal to channel either line, RCA 2/3 connectors or USB port.
17. 2TK TO MAIN SIGNAL SENDING SELECTOR
Selects the auxiliary input or output signal to the main mix (2TK or BT).
18. 2TK TO MONITORS SIGNAL SENDING SELECTOR
Selects the 2 TK signal at the monitor output.
19. BLUETOOTH PAIRING
Press and hold until the indicator flashes quickly. In the device that you want to pair, search and
select BT2.1. If the pairing is successful the indicator will remain on.
20. MONITORS VOLUME CONTROL
Adjusts the volume of the monitors output.
21. MAIN VOLUME CONTROL
Adjusts the volume of all unit. It regulates the main output.
22. CLIP L/R INDICATORS
Output indicator of main mix.
4