Puky H25 Manual De Instrucciones página 10

Hand cart
The hand cart may not be cleaned
with a pressure washer. Do not
wash fabric elements in the wash-
ing machine. Clean the hand cart
with a mild soap solution only and
then carefully rub dry using a soft
cloth.
Keep corrosive materials (winter
road salt, seawater, fertiliser) away
from the hand cart. The hand cart
may not be stored in a damp
place.
Unpacking and scope of delivery
Do not use sharp implements to
open the packaging or remove the
protective materials. These may
accidentally damage the paintwork
or parts of the hand cart.
z Remove all parts from the pack-
aging.
z Remove the protective materials.
z Check for completeness and en-
sure that the delivery is undam-
aged. In the event that a part is
missing, contact your specialist
dealer before you start any fur-
ther work.
The delivery is made up of
(Figure A):
1. Vehicle chassis (with strap and
pad)
2. Front axle
3. Fabric pocket
4. Handle
5. Towing rod
6. Fixtures for the front axle
(plastic bag)
7. Fixtures for the floor panel
(plastic bag)
Assembly
The assembly notes can be found
on the final pages of these instruc-
tions.
You will need the following tools in
order to assemble the product
(Figure B):
1. Combination wrench 10 mm
2. Allen key 4 mm
3. Allen key 5 mm
10