English | 5 - Akku Power L-1810 Instrucciones De Uso

1. For your safety
Read all safety notes and instructions! KEEP THIS REFERENCE MATERIAL IN A SAFE
PLACE! Read all instructions before using the battery charger.
1. Do not operate the battery charger on an easily flammable base or in a flammable environ-
ment.
2. Do not charge batteries that are not permitted for this battery charger.
3. Use the battery charger only in dry rooms. The penetration of humidity into the battery char-
ger increases the risk of electric shock.
4. Do not load the battery at ambient temperatures of below 5°C or above 40°C.
5. Do not use or disassemble the battery charger if it has been damaged (e.g. after falling) or if
the power supply cable or plug is damaged.
6. Do not dismantle either the battery or the battery charger.
7. Protect the battery charger from metal objects, as there is a risk of short-circuit. The ventilati-
on slots on the battery charger must also be protected from metal and/or metal filings.
2. Battery charger technical data
Model:..................................................................................................L1810 / L1830 / L2410 / L2430
Charges battery systems:.................................................................................Ni-Cd / Ni-MH / Li-ION
EU Version input voltage:.......................................................................................230V / 50Hz-60Hz
US Version input voltage:........................................................................................110V / 50Hz-60Hz
Output voltage L1810 / L1830:...........................................................................................7,2V - 18,0V
Output voltage L2410 / L2430:........................................................................................2,4V - 24,0V
Charge current.....................................................................................................................max. 3,0A
Energy absorption:..................................................................................Standby < 1W, max. 70W
Weight:............................................................................................................................max. 0,5 kg
Dimensions L1810 / L2410: ...............................................................................152 x 86 x 76 mm
Dimensions L1830 / L2430: ...............................................................................150 x 85 x 75 mm
Operating temperature:.................................................................................................+5°C - 40°C
Storage temperature: ..................................................................................................-20°C - 60°C
Safety class:.................................................................................................................................f /II
3. Basic functions
• Universal fast battery charger for NiCd,
Ni-MH and Li-Ion battery packs of 2.4V
to 24V (L2410, L2430) and 7.2V to 18V
(L1810, L1830)
• Microprocessor controlled charging, char-
ging times 30-70 min. depending on the
capacity and age of the battery
• For Ni-Cd/Ni-MH and AP Li-ION batteries
• Pulse trickle charging (Ni-Cd / Ni-MH)
• Mechanical, electrical pole protection
• Battery defect detection
• Battery pressure increase protection
• Dynamic charge current adjustment
• Automatic voltage detection

English | 5