Declaration Of Conformity; Maintenance And Repair - LORCH MobilePower 1 Manual De Instrucciones

Declaration of conformity

10 Maintenance and repair

Please heed the current safety regula-
tions during all care and maintenance
work.
The battery will suffer normal wear, even when used as
intended, and will need to be replaced in good time, de-
pending on the type and duration of the use.
The machine requires a minimum of care and mainte-
nance. Only a few items need to be checked regularly to
ensure trouble-free long-term operation.
10.1 Check regularly
‰ Check the following points for damage before commis-
sioning the battery each time:
– Battery cable with equipment plug
– Housing
– Keyboard membrane and control panel
‰ Under normal use, it is adequate to clean the battery
housing, if required, with a dry non-fraying cloth.
Danger of death by electrocution!
Never open up the battery housing your-
self, or carry out any changes to it.
11 Disposal
Only for EU countries.
Batteries are special waste. The batteries
must only be disposed of via authorised re-
turn system operators. Batteries must never
be disposed of in household waste.
12 Service
Lorch Schweisstechnik GmbH
Im Anwänder 24 - 26
D-71547 Auenwald, Germany
Germany
Tel. +49 (0)7191 503-0
Fax +49(0)7191 503-199
LORCH Download Portal:
http://www.lorch.biz/download
Here you can get more technical documentation about
your product.
06.15
13 Declaration of conformity
We herewith declare that this product was manufactured
in conformance with the following standards or official
documents: Standard EN 60974-1:2012, EN 60974-
3:2014, EN 60974-10:2007 CL.A, in accordance with the
stipulations of the directives 2014/35/EU, 2014/30/EU
and 2011/65/EU.
Wolfgang Grüb
Managing Director
Lorch Schweisstechnik GmbH
909.2099.9-02
2016
- 17 -