Teac SR-L230i Manual Del Usuario página 21

7 Set the volume using the skip buttons
(.//), and then press the ALARM 1 or
ALARM 2 button.
The volume for timer operation is adjustable from
10 to max.
Setting the timer is now completed.
ALARM 1, ALARM 2
To turn on the timer
1 After setting the timer, press the ALARM 1 or
ALARM 2 button to turn the timer on.
The Timer indicator (
display.
2 Prepare the source.
When the source is set to "iPod", insert an iPod.
When the source is set to "TUNER", tune in a
station.
3 Press the button to turn the unit standby.
Don't forget to turn the unit standby, or the
timer won't work.
If you turn the timer on when the unit is on, the
unit will turn off when the timer reaches the off
time.
< Playback volume will gradually increase up to your
set volume when the unit is turned on by timer.
< If the source is set to "iPod" but no iPod is set, the
unit will turn on into TUNER mode.
< When the source is set to "TUNER" and the unit
turns on, it will tune in to the station you selected
last time.
or ) appears on the
21