EAS ELECTRIC EPUR300UV Manual De Usuario página 20

Ocultar thumbs Ver también para EPUR300UV:
Tabla de contenido

Publicidad

UV
UV
UV
Wind speed setting
Timing
Lock
press power key start machine,air purifier starts work
auto
are red, green and blue;
During the first operation, the cleaning speed will be run according to the
feedback of the internal dust detector. The digital tube displays the current
PM2.5 value. The smaller the value, the better the air quality;
Standby mode refers to the state when the power is switched on and not
turned on.
.
In the power-on state, press the "Wind Speed" button, and the wind speed will be
switched according to the cycle ofautomaticmode, 1、 2、 3andsleepmode,
this point, the digital tube according to the set wind speed gear display
the current wind speed;
In the sleep mode, the indoor monitor feedback air quality, the air volume
always meets the quiet effect during sleep, at this time, the key light is half on,
other lights are all off .
In the automatic or sleep mode, the purification speed does not need to be
adjusted. If you want to change the air volume, please press the wind speed
button to exit the automatic or sleep mode.
During operating state , press the "Time" key to start timing shut
down function . The time could be set as 1-2-3-4-12(h)-cancel the timing ,
the corresponding indicator light will be on.
After setting the timing shut down , if pressing the "power"key, the
timing setting will be cancelled and immediately enter off state.
lock
.
8
power
automatic light on and the air quality lights
,
press the UV
press the timing
for 3S
;
UV
at
V.2

Publicidad

Tabla de contenido
loading

Tabla de contenido