Connecting The Speakers - Hebo hebocall Manual Del Usuario

English / 37
INSTALLING THE ELECTRONICS BOX IN
YOUR HELMET
(0.6) After replacing the helmet lining, the
®
HEBOCALL kit should be fitted to the outside
of the helmet. Stick the plate with a clip to the
helmet casing at the desired height. We
recommend that you locate the HEBOCALL
kit at the back of the helmet (see example).
(0.7) Once the plate with the clip has been stuck
in position, connect the kit.
(0.8) Plug the speaker cable into the jack as shown.
(0.9) Your HEBOCALL
be ready to connect for the first time.
® ®
Bluetooth kit will then
0.6 Clip plate
®
0.7 Fitting the kit/plate

0.8 Connecting the speakers

0.8 Connecting the speakers
0.9 The installed equipment