Technical Data - SOMFY Skitter io Manual Del Usuario

2) Connect the Skitter io to the computer
using the USB cable and follow the
instructions displayed on the screen to
create and save scenarios 1 and 2.
6. OPERATION
- Unplug the Skitter io in accordance with the computer's
peripheral disconnect process.
- Fit the customisation ring on the Skitter io.
Ensure that the Skitter io is disconnected prior to use.
- Press the button (f) to run scenario 1.
- Press the button (g) to run scenario 2.
- Press the button (h) to stop scenarios 1 and 2.
- The indicator light
order is executed properly, and orange to indicate a defect.
The battery indicator
the battery is low.
7. INSTALLING THE SKITTER IO
The Skitter io contains a magnet and can thus be attached to metal surfaces.
Use the adhesive support provided to place it on any other surface:
1) Check the radio range before
installing the adhesive support.
2) Remove the protective fi lm from the
support.
3) Stick the support in the desired
location and press on it fi rmly to
ensure optimum bonding.
4) Place the Skitter io on the support.
Using the Skitter io on a metal surface may reduce its radio range.

8. TECHNICAL DATA

Radio frequency: 868-870 MHz, tri-band io-homecontrol® two-way,
which searches for an unoccupied radio frequency prior to transmitting.
Radio range: 20 m through 2 concrete walls. The building in which the product is used may reduce
the radio range.
Protection rating: IP30.
Operating temperature: 0 °C to +60 °C.
Dimensions: Ø 64 mm, thickness 22 mm.
Power supply: 1 type N battery, 1.5 V.
USB port: type mini-B.
10
5066049A00_Skitter _io.indb 10
2
(i) comes on green to indicate that the
(j) comes on to warn that
2
f
h
3
"with LBT" (Listen Before Talk)
Copyright © 2010 Somfy SAS. All rights reserved.
Skitter io
i
g
j
4
,
15/07/2010 15:57:49