Charging The Headset Via A Usb Socket Of A Computer; Charging The Headset Via The Usb Power Supply Available As An Accessory; Wearing The Headset; Switching On/Off - Sennheiser Communications VMX OFFICE Instrucciones De Uso

3. Charging the headset via a
USB socket of a computer
Take off the headset.
Connect the small plug of the USB
charging cable to the socket for
power supply
Connect the USB plug of the USB
charging cable to a USB socket of a
computer.
4. Charging the headset via the
USB power supply available as
an accessory
Take off the headset.
Connect the small plug of the USB
charging cable to the socket for
power supply
Connect the USB plug of the USB
charging cable to the USB socket of
the power supply.
Connect the power supply to the
mains.

Wearing the headset

Open the microphone boom
The headset is switched on. The head-
set LED slowly flashes blue.
Put on the headset. The headset can
be worn on either the left or right ear.
Turn the microphone
towards your mouth.
14
.
.
.
boom
The speaker
two directions so that you can
wear the headset on either
your left or right ear without
changing it. However, the
speaker is designed so that
other people in the vicinity
cannot listen to the other
party and are not disturbed
by the speaker.

Switching on/off

Switching the headset on

Open the microphone boom
A call from the last used
device is answered imme-
diately by opening the
microphone boom without
any further action (there
might be a little delay
depending on the type of
mobile phone used).

Switching the headset off

Close the microphone boom.
All settings are saved when
the headset is switched
off.

Switching the base station off

Unplug the power supply.

Switching the base station on

Connect the base station to the mains
as described on page 7.
operates in
.