Before First Use; Cleaning And Maintenance - Royal Catering RCTD-2 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
IV. BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the pa-
ckaging is damaged, please contact your transport company and distributor within
3 days, and document the damages as detailed as possible. Do not turn the package
upside down! When transporting the package, please ensure to keep it horizontal and
stable. Please keep all packaging materials (cardboard, plastic tapes and styrofoam), so
that in case of return, the device can be sent back to the service centre in accurate
condition.
V. USE OF THE DEVICE
Before using it for the first time, the device must be cleaned with a mild deter-
gent.
Please put the machine on an even place, which is tilt resistant and can support
the combined weight of the machine. The can opener should be assembled to the
working surface by using all three fixing holes. Assembling in any other way can
cause device damage!
ASSEMBLY
8
After assembling the device in the ap-
propriate place, move the lever / crank
(1) up to the horizontal position.
Move the main rail guide (4) up.
Place the can at the fixing base (3).
Lower the main rail guide (4) firmly –
the cutting knife will thrust into the can
lid.
Rev. 05.04.2017
Lower the lever / crank (1) to the working position.
Turn the crank, the can will be rotating and the cutting knife will cut off the lid.
VI. CLEANING AND MAINTENANCE
Clean the device every day accurately for a correct operation and longevity of the
equipment. Clean the surfaces with water and soap or alcohol. Please do not use
detergents with abrasives or substances based on chlorine or soda (chlorine water,
muriatic acid), steel wool or similar products. They can cause immense damage!
Rev. 05.04.2017
9

Publicidad

Tabla de contenido
loading

Tabla de contenido