Samsung RS25H50 Serie Manual De Usuario página 26

Ocultar thumbs Ver también para RS25H50 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Insert anew water filter into the filter housing.
4.Turn t he new water filter 90 °clockwise.
--.j
5. Press and hold t he Water button for3seconds
after changing
the filter toreset the filter
indicator.
Confirm
the indicator
turns b lue. When you
replace
the water filter, some water may l eak
from the water filter housing.
Make sure t owipe u pany leakage
that m ay
have occurred.
Removing residual matter from inside the
water supply line after installing a new
filter
lae"
Water
1. Turn ON the main water supply.
2. Press the Water button on the control panel.
Place a cup or glass under the water outlet,
and then push the cup or glass against the
dispenser pad until you hear a "click".
3. Flush 3 gallons of water through the filter.
(Flush approximately 6 minutes.)
This will clean the water supply system and
remove air from the lines.
4. Additional flushing may be required in some
households.
5. Open the refrigerator door and make sure there
are no water leaks coming from the water filter.
®
A newly installed water filter cartridge may
cause water to briefly spurt from the water
dispenser.
This is the result of air getting into the line.
It poses no problem to the operation of the
refrigerator.
Engl sh --26

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rs25h5000ww/aa-00Rs25h5000sr/aa-00

Tabla de contenido