Kasanova YGK000001 Manual De Instrucciones página 7

HOVERKART FOR HOVERBOARD
LIMITS AND SPECIFICATIONS
Respect the following limits to use the hoverkart in a safe way.
Maximum speed allowed: 12 Km/h
Maximum weight allowed: 100 kg
PARTS LIST
A. hoverkart seat
B. hoverkart seat support
C. adjustable telescopic pipe
D. foot rest
E. wheel
F. handle bars
G. Velcro straps
H. Fixing point
I. Assembly tools
ASSEMBLY TOOLS
L. Knob
M. Wrench
N. Fixing bolts for handle bars
O. Fixing bolts for hoverkart seat
P. Fixing screws for hoverkart seat
Q. Washers for fixing the hoverkart seat
R. Hex key
ASSEMBLY
Assemble your hoverkart correctly according to the
following instructions:
• Open the box. Make sure that all parts
STEP 1:
are included.
• Fix the hoverkart seat support (B) to the hoverkart seat (A). Use the four fixing screws, the
STEP 2:
four fixing bolts and the four washers (O; P; Q) to mount the hoverkart seat (A). Use the hex key (R)
as shown.
• Fix the handle bars (F) by screwing the two fixing bolts provided (N). Use the wrench to
STEP 3:
screw them (M).
• Adjust the telescopic tube (C) by inserting the knob (L) in the hole and screw it safely.
STEP 4:
Adjust the length of the hoverkart by pulling up the knob (L) and pull out the adjustable telescopic
knob (C).
• Adjust the hoverkart to the hoverkart through the fixing point (H) and screw it according to
STEP 5:
your hoverkart dimensions. Take the Velcro straps (G) and insert them into the opening of the fixing
point (H) by tightening it up carefully to the hoverboard. Make sure that the Velcro straps are tightly
fastened (G).
7